Hybrid-Electric Range Extended Audi TT: Preparing the Chassis for the New Powertrain

Monday, June 29, 2009

Preparing the Chassis for the New Powertrain

Having finally just the "shell" of the vehicle, the entire rear end of the car was stripped from most of its sheet metal so it could accommodate for the electric motor and differential.

(The complete rear subframe was taken out of the vehicle)

Peter is removing some hoses in order to remove the gas tank.

(Yep, that was one of the holes for one of the fuel pumps)

This video shows how light the shell of the car was... Just a handful of people could lift the car and put it over some dollies.

2 comments:

GogiDjanFebruary 22, 2010 at 3:17 PM
By the way folks - 4 HP (human power) is not the main power source of the vehicle... :)
ReplyDelete
Replies
arumugamApril 16, 2012 at 3:55 AM
Thanks for sharing, I will bookmark and be back again

In-Car Infotainment
ReplyDelete
Replies

Add comment

Project Description

HEATT Team 2010 - 2011:

The transportation industry has yet to find an alternative fuel source with the efficiency and practicality necessary to lower oil use. In order to further this transition, this project bridges the gap between gasoline and fuel cell technology for vehicles. The prototyped power train for this project features a 288 olt battery system combined with an internal combustion engine generator and hydrogen PEM fuel cell to provide addition range. The current state of the power train allows charging for the batteries solely from a house hold socket. The projected range of the battery system is 60 miles; the combined range is 400 miles. To achieve the combine range, the ICE generator and hydrogen PEM fuel cell must be integrated into one system. Our focus is to design a Battery Management System (BMS) to charge the batteries either from a house hold socket, gasoline generator, or hydrogen fuel cell. This would require a charge algorithm that we will have to design. The BMS will be designed and simulated in LabVIEW. The BMS will optimize the performance of the batteries by monitoring the charge and discharge cycles, as well as protect the batteries from power surges and thermal failures.

HEATT Team 2010:

A series hybrid electric powertrain with range extending capabilities using hydrogen and gasoline was designed and modeled in LabVIEW to simulate performance and fuel economy. To prove the concept of this design, a 2000 Audi TT was converted to a plug-in AC electric vehicle with a 90kW electric motor and LiFePO₄ batteries. A 10kW internal combustion generator and 5kW hydrogen PEM fuel cell were installed to extend the range of the vehicle allowing the vehicle to be run easily on today’s fuel and ready for hydrogen, a possible future alternative fuel.

Using the Environmental Protection Agency’s (EPA) standard city and highway driving tests, the vehicle has a theoretical increase in fuel economy from 22/31 miles per gallon (MPG) respectively to 230/173 miles per gallon gasoline equivalent (MPGGE).

Hybrid-Electric Range Extended Audi TT

Monday, June 29, 2009

Preparing the Chassis for the New Powertrain

2 comments:

Team Members

Project Description

Blog Archive

Links

Followers

Search